HERE IS HOW TO COPY ENTIRE GRIDS TO OTHER GRIDS

- read the radio back into Scancat and save that file
as a "RSD" Personal database file

- If you want to rearrange it,

- you can copy the entire grid from one grid into another.

        To copy an entire grid do this:

        1 - click on the "TOP LEFT (Empty) gray square
          - This turns the entire grid "red" or "selected"
        2 - Press THE KEYBOARD COMBO OF "CTRL + C (Copy)
        3 - go to the "target grid
        4 - click on the "TOP LEFT (Empty) gray square
          - This turns the entire grid "red" or "selected"
        5 - Press THE KEYBOARD COMBO OF "CTRL + V (paste)

        EVERYTHING in the copied grid including button settings,
       is pasted into the selected target grid.

           OR - there is an option
        Load Personal SECOND Database
        This loads a database in a completely new 2nd set of grids

you can use the above 1-2-3-4-5 to copy one of IT"s grids.

jim
=======================================

Thanks Jim!
If I understand whats going on I need to do the following to
rearrange what I have programmed in my pro 97.
First, I have to read my pro 97 into scancat.
Second, I have to save this info to a source file.
Third, I need to load this file into the upper part of scancat.
Fourth, I need to rearrange and add frequencies to the upper part.
Fifth, I need to copy all of the top part into the bottom part.
sixth, I download the whole bottom part to the pro 97
Right?
thanks again Karl